Connect devices to Surface Hub 2S

Surface Hub 2S supports flexible device connectivity for seamless collaboration and content sharing. You can connect external devices, mirror displays, and use third-party peripherals like video conference cameras, conference phones, and room system devices. Surface Hub 2S enables interactive controls through TouchBack and InkBack, enhancing collaboration during meetings.

To project content with cables, connect using the ports along the bottom edge of the compute cartridge. Available ports include HDMI, USB-C, USB-A, Ethernet, and DisplayPort.

• HDMI and USB-C – Connect for audio and video input. USB-C supports TouchBack and InkBack, allowing control from Surface Hub 2S.
• DisplayPort – Use DisplayPort to mirror Surface Hub’s display to another screen.

To project your screen with cables, connect using the ports along the bottom edge of the compute cartridge. The compute cartridge has an HDMI port, a USB-C port, USB-A, and the Ethernet port and DisplayPort.

You can project in with USB-C or HDMI—the DisplayPort is only for mirroring your Surface Hub’s screen on another screen.

For optimal video and interactive functionality, use native cable connections where possible (e.g., USB-C to USB-C or HDMI to HDMI). Alternative connections like MiniDP to HDMI or MiniDP to USB-C will work, though extra configuration may be required.

When connecting a guest computer via USB-C, Surface Hub 2S automatically configures several USB devices to enable TouchBack and InkBack, as shown in the Device Manager table below.

You can input video to Surface Hub 2S through USB-C or HDMI. Supported resolutions and frame rates vary by signal type.

You can output video to another display using MiniDP, as indicated in the following table.

Surface Hub 2S includes a MiniDP video-out port, allowing you to project visual content to another display. If you plan to use Surface Hub 2S to project to an external screen, follow these guidelines for optimal results.

• Keyboard required: Before you begin, connect an external keyboard to Surface Hub 2S, either wired or Bluetooth-enabled. Unlike the original Surface Hub, Surface Hub 2S does not include a keyboard in the shipping package.

• Set to duplicate mode: Surface Hub 2S supports video-out in duplicate mode only. To configure this setting:

  1. Press Windows logo key + P to open the Project pane on the right side of the screen, then select Duplicate.
  2. After your session, select End Session to save the duplicate setting for future use.

• Aspect ratio considerations: Surface Hub 2S has a 3:2 display aspect ratio, which may differ from the aspect ratio of the external display. When projecting, the MiniDP output will maintain the 3:2 ratio, which may result in letterboxing or curtaining on screens with other aspect ratios, like 16:9.

Use these recommendations for cables:

• USB – USB 3.1 Gen 2 cables for optimal performance.
• MiniDP – Certified DisplayPort cables up to 3 meters.
• HDMI – For long-distance connections, HDMI cables are recommended. Install repeaters if necessary.

Surface Hub 2S supports wireless connections via Miracast on Windows 10 and 11 devices.

1. Press Windows logo key + K.
2. Select Surface Hub 2S from the list of nearby devices.
3. Enter a PIN if prompted by your administrator.

When a Windows 8 or later device is connected, select Allow mouse, keyboard, touch, and pen input on the connected device to control it from Surface Hub 2S. If using HDMI, add a USB cable to enable interactive input.

You can connect Bluetooth accessories, including mice, keyboards, headsets, speakers, and Surface Hub 2S pens.