Running the Digital Still Camera Tests
Note This content applies to the Windows Logo Kit (WLK). For the latest information using the new Windows Hardware Certification Kit (HCK), see Windows HCK User's Guide on the Windows Hardware Dev Center.
Logo Program: Windows Vista Client - Basic (x86, x64) Logos
Connect your Digital Still Camera to the DTM Test Client Machine.
Install your Digital Still Camera for the device under test on the Test Client Machine.
From DTM studio, go to Explorers Device Console. Select your Machine Pool from the drop down list. Select View By Machine and then locate your device in Available Devices.
- If DTM Studio is running on Windows Vista Ultimate, your device can found under Portable Devices.
Ensure that your device is powered on and registered in Device Console.
- Right-click the device and select View Device XML. Verify the entries such as DeviceID, ModelID, DriverDate, DriverVersion, and ImagePath for your driver and device.
- If your device does not appear or if you are seeing stale entries for previously connected devices, you may need to wait a few minutes and refresh the Device Console and/or reconnect the device.
Create a new submission:
a. From Device Console, select View By Submission.
b. From the Submission drop down list, select <New Submission>.
c. Select OS from the available options.
d. Select Category: Device Submission.
e. In the Create New Submission dialog box, select Portable Devices > Digital Still Camera.
f. In the Create New Submission dialog box, select Basic under Qualification Level.
g. Enter a name for your submission, and select your machine pool.
h. Click Finish to complete and load the new submission.
Depending on how your INF file is authored, you may see multiple entries for your device. For the Windows Vista Client submission, select the device entry that corresponds to the driver INF, not the TS-redirection driver INF. For your convenience, one way to differentiate between the driver and the TS-redirection INF files is to author them with slightly different DriverVer or Manufacturer entries.
With the correct device selected, from the Available Jobs, you can now add jobs from the first Digital Still Camera category. If your device connects via USB, you will see USB jobs in addition to the WPD Compliance Tests jobs. For requirements on running these jobs, please see Supplemental Tests or view the job details in Job Explorer.
See the table below for a list of applicable jobs.
Logo Program: Windows Vista Client - Premium (x86, x64) and Windows 7 (x86, x64) Logos
Connect a MTP Digital Still Camera to the DTM Test Client Machine.
Note If the device supports mode switching, make sure that the device is in a mode that uses MTP.
From DTM studio, go to Explorers Device Console. Select your Machine Pool from the drop down list. Select View By Machine and then locate your device in Available Devices. Your device can found under Portable Devices.
Ensure that your device is powered on and registered in Device Console.
- Right-click the device and select View Device XML. Verify the entries such as ModelID, DeviceID, and ImagePath for your driver and device.
- If your device does not appear or if you are seeing stale entries for previously connected devices, you may need to wait a few minutes and refresh the Device Console and/or reconnect the device.
For Windows Vista Client (x86, x64), repeat steps 1 through 4 for one additional machine with an identical device. You need to setup two machines to complete the TS Plug and Play Redirection tests as part of your current submission.
Create a new submission:
a. From Device Console, select View By Submission.
b. From the Submission drop down list, select <New Submission>.
c. Select OS from the available options.
d. Select Category: Device Submission.
e. In the Create New Submission dialog box, select Portable Devices > Digital Still Camera.
f. In the Create New Submission dialog box under Qualification Level, select Premium for Windows Vista or Logo for Windows 7**.**
Note that if you are planning to submit for an Additional Qualification, that submission type may appear.
g. Enter a name for your submission, and select your machine pool.
h. Click Finish to complete and load the new submission.
With the correct device selected, from the Available Jobs, you can now add jobs from the first Digital Still Camera category. If your device connects via USB, you will see USB jobs in addition to the WPD Compliance Tests jobs. For requirements on running these jobs, please see Portable Media Devices Tests or view the job details in Job Explorer.
The following table indicates which jobs are required based on connectivity type that must be run:
| Test Name | Windows Vista | Windows 7 | ||||||
|---|---|---|---|---|---|---|---|---|
| USB | BT | IP | Other | USB | BT | IP | Other | |
| Connectivity Tests - PCI | ||||||||
|
PCI Hardware Compliance Test For a Single Device (PCIHCT) |
X |
|||||||
| Connectivity Tests - USB | ||||||||
|
USB Address Description Test (Automated) |
X |
X |
||||||
|
USB Descriptor test (Automated) |
X |
X |
||||||
|
USB Device Control Requests (Automated) |
X |
X |
||||||
|
USB Enumeration Stress (Automated) |
X |
X |
||||||
|
USB Selective Suspend (Automated) |
X |
X |
||||||
|
USB Specification Compliance (Automated) |
X |
X |
||||||
|
USB Isochronous Alternate Interface Presence (Automated) |
X |
X |
||||||
|
USB HIDView (CV) (Manual) |
X |
X |
||||||
|
USB Device Framework (CV) (Manual) |
X |
X |
||||||
|
USB Serial Number (Automated) |
X |
X |
||||||
|
USB System Suspend Resume Test |
X |
X |
||||||
|
USB Disable Enable (Automated) |
X |
X |
||||||
| Connectivity Test - 1394 | ||||||||
|
1394 Industry Certification Test ID Entry (MANUAL) |
X |
X |
||||||
| Device Fundamentals Tests | ||||||||
|
Web Services for Devices |
X |
X |
X |
X |
X |
X |
X |
X |
|
Run INFTest against a single INF |
X |
X |
X |
X |
X |
X |
X |
X |
|
Device Path Exerciser |
X |
X |
X |
X |
X |
X |
X |
X |
|
Plug and Play Driver Test |
X |
X |
X |
X |
X |
X |
X |
X |
|
Concurrent Hardware And OS Test (CHAOS) |
X |
X |
X |
X |
X |
X |
X |
X |
|
Embedded Signature Verification |
X |
X |
X |
X |
X |
X |
X |
X |
|
WDF Logo Tests |
X |
X |
X |
X |
X |
X |
X |
X |
|
Sleep Stress With IO |
X |
X |
X |
X |
X |
X |
X |
X |
|
Disable Enable With IO |
X |
X |
X |
X |
X |
X |
X |
X |
|
Common Scenario Stress With IO |
X |
X |
X |
X |
X |
X |
X |
X |
|
Reinstall With IO |
X |
X |
X |
X |
X |
X |
X |
X |
| Portable Devices Tests for Digital Still Camera | ||||||||
|
WPD Compliance Tests - ALL SERVICES |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - CONTACT SERVICE |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - METADATA SERVICE |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - HINTS SERVICE |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - MODEL_ID |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - FUID |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - NOTES SERVICE |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - RINGTONE SERVICE |
X |
X |
X |
X |
||||
|
WPD Compliance Tests - STATUS SERVICE |
X |
X |
X |
X |
||||
|
Verify Portable Media Device correctly supports Selective Suspend (MANUAL) |
X |
X |
X |
X |
||||
|
Digital Still Camera Windows HD Imaging Additional Qualification Test (MANUAL) |
X |
X |
X |
X |
||||
|
MTP Compliance Test - Cameras |
X |
|||||||
|
Camera or Camcorder [Windows Vista Premium Logo] MTP Compliance Test |
X |
|||||||
|
Camera or Camcorder [Windows Vista Basic Logo] MTP, PTP Compliance Test |
X |
|||||||
If the Digital Still Camera has the ability to connect to a PC over other modes, additional testing is required.
Build date: 9/14/2012