Share via

Preparing for Pointing Drawing Testing

  • Article

Note  This content applies to the Windows Logo Kit (WLK). For the latest information using the new Windows Hardware Certification Kit (HCK), see Windows HCK User's Guide on the Windows Hardware Dev Center.

Several tests that are part of the Pointing Device suite require the client system to restart (often more than once) to complete a test run. The test description and the running instructions specify whether a test requires a system restart. Although these tests programmatically restart the test system, you must manually log on to the test system after each system restart so that the test run can resume. You can avoid this requirement by enabling autologon functionality on the test system. For more information about autologon, see Running with autologon enabled.

Test System Configuration

  • Connect the pointing device under test to the client system and verify basic functionality before proceeding

  • If the test device supports USB, the test devices must be connected through an external USB hub (not directly to the test system)

  • If the device supports a USB serial number, be sure to attach the additional test device to the external hub before scheduling the USB Serial Number test

 

 

Build date: 9/14/2012