Share via

1394 Industry Certification Test ID Entry (Manual)

  • Article

Note  This content applies to the Windows Logo Kit (WLK). For the latest information using the new Windows Hardware Certification Kit (HCK), see Windows HCK User's Guide on the Windows Hardware Dev Center.

Type: Manual Test

Overview

Manual test to enter in the test ID from the 1394 trade association logo tests.

Details

If the device has a 1394 trade association logo select the pass radio button and enter the test ID in the details section.

Results Interpretation

Run Time: 1 minute

Log File:

**System Restart Required:**No

Test Category:

Supported operating systems for Logo or Signature testing:

  • Windows 7

  • Windows Server 2008

  • Windows Vista

  • Windows Server 2003

  • Windows XP

Program:

Requirements

Software Requirements

The test tool requires the following software:

  • Supported operating system (see list above).

Hardware Requirements

The test tool requires the following hardware:

  • Device to be tested
  • Windows keyboard
  • Two-button pointing device
  • Color display monitor capable of at least 1024 by 768 resolution, 32-bits per pixel, 60 Hz

Processor

The test tool runs on the following processor architectures:

  • x86
  • x64
  • Itanium

Troubleshooting

19.18.1 All devices must support the IEEE 1212-2000 general ROM format. This requirement includes having header information and bus information block and root directory entries.

Reference document: WLP#-B2.2.4.2; IEEE 1212-2000.

19.18.2 Devices must supply textual descriptors for the Vendor_ID and Model_ID entries of the configuration ROM.

Reference document: WLP#-B2.2.4.12; IEEE 1212-2000.

 

 

Build date: 9/14/2012